Battery Information (1-Way) - Python 592 Owner's Manual

Remote Learning
Press the
is ready to program to the system.
Per the instruction in the Remote Pair section of this guide, follow-
ing step 4 of Placing the system into the remote pair mode. Press
and hold the
the remote has been learned.

Battery Information (1-Way)

The 1way companion remote is powered by one 3V coin cell lithium
battery (P/N CR-2032) that should last approximately one year under
normal use.
Battery Replacement
Rear View
1
Battery
Cover
clip with the positive (+) side up. Replace the battery cover. The re-
mote control is now ready for use.
52
button,3 LED flashes and beeps indicates the remote
button, the siren emits one long chirp to confirm
1. Slide the battery cover up by ap-
2
plying equal pressure at its top and
bottom (the arrow on the cover indi-
cates the direction), remove the cover
Battery
Clip
from the remote control housing.
+
2. Gently pry up on the battery to re-
move it from the holder. Insert a new
battery into the holder and under the
© 2009 Directed Electronics. All rights reserved.