Basic Commands (Function Level 1); Arm; Aux/Trunk - Python 592 Owner's Manual

Basic commands (function level 1)

Arm

Press and release
The alarm arms, doors lock (if connected), and the siren chirps and
lights flash once. The
Valet mode* is On the doors lock and the
tion and tone play. Exit Valet mode to arm the alarm normally.
If a trigger zone fault is detected the siren chirps once again and the
Trigger Zone Fault report** plays.
To Arm and Panic
Press and hold
The alarm Arms (or Locks in Valet) and, after 2 seconds, sounds
the siren and flashes the lights. The
tones play to confirm. Press the
put.

AUX/Trunk

Press and hold
The Trunk opens (if connected) when this button is pressed for 2 sec-
onds. The
TRUNK RELEASE
* See
** See
12
animation and beeps play to confirm. If
ARMED
AUX
animation and tones play to confirm.
Remote and System Operations
Alarm Features
for details.
LOCKED (IN VALET)
animation and siren
PANIC
or button to stop the out-
section for details.
© 2009 Directed Electronics. All rights reserved.
anima-