Chapter 4. Advanced Setup
Step 3. Checking Wireless Channel
Change access point AP-1 channel. (Factory Shipment Status:36CH (5180MHz))
2.
1.
Step 4. Configuring Client-PLC Communication
Configure a terminal MAC address. A MAC address of PLC Ethernet unit must be set to a client CL-1.
4
1.
2.
4.
3.
4-26
(1) On "Wireless settings" screen, change AP-1's [Channel] to 40CH.
(Factory Shipment Status:36CH)
AP-1
Click
Set
<To Configure>
(1) Select "Settings" menu, "Basic settings".
• "Basic settings" screen is displayed.
(2) Enter a MAC address of PLC Ethernet unit in the [Communicating unit's
MAC address]. (Example:00-00-0A-68-70-4A)
(3) Click <Apply and restart>.
CL-1
Click
Click
Click
Enter