Chapter 5. Setup Menu
● IP setting for administrator
This item is used to specify restriction on access to a setup screen by an IP address.
5
5-16
To limit access to a setup screen of an access point, the administrator
can register up to 8 terminal IP addresses that make wired or wireless
access to the access point.
IP setting for administrator cannot include its own IP address.
Example of Unavailable Setup:192.168.0.1 (Initial value)
* If an administrator IP address is specified, only terminals with registered IP addresses
can make access to a setup screen of an access point.
* If it is blank, any terminal connected to the access point can make access to a setup
screen.
AP