Big Pond - D-Link DIR-100 User Manual

Section 3 - Configuration
User Name:
Enter your Big Pond user name.
Password:
Enter your Big Pond password and then retype the
password in the next box.
Auth Server:
Enter the IP address of the login server.
Login Server IP:
Enter the IP address of the login server.
MAC Address:
The default MAC Address is set to the WAN's physical
interface MAC address on the Broadband Router. It is
not recommended that you change the default MAC
address unless required by your ISP.
The default MAC address is set to the WAN's physical
Clone MAC interface MAC address on the Broadband Router. You
Address: can use the "Clone MAC Address" button to copy the
MAC address of the Ethernet Card installed by your
ISP and replace the WAN MAC address with the MAC
address of the router. It is not recommended that you
change the default MAC address unless required by
your ISP.
D-Link DIR-100 User Manual
Internet Setup

Big Pond

3