Big Pond - D-Link DIR-400 User Manual

Section 3 - Configuration
Choose Big Pond if your ISP uses a Big Pond connection. Your ISP will provide you with a username and password.
User Name: Enter your Big Pond user name.
Password: Enter your Big Pond password and then retype the
password in the next box.
Auth Server: Choose your Authentication Server from the
dropdown box.
Login Server IP: Enter the IP address of the login server. (optional)
MAC Address: The default MAC Address is set to the WAN's
physical interface MAC address on the router. It is
not recommended that you change the default MAC
address unless required by your ISP.
Clone MAC
The default MAC address is set to the WAN's
Address:
physical interface MAC address on the router. You
can use the "Clone MAC Address" button to copy
the MAC address of the Ethernet Card installed by
your ISP and replace the WAN MAC address with the
MAC address of the router. It is not recommended
that you change the default MAC address unless
required by your ISP.
D-Link DIR-400 User Manual
Internet Setup

Big Pond

6