Save Settings To Tftp Server - D-Link DES-6000 User Manual

After filling in the fields above, press START to initiate the Ping test.
The fields you can set are:
♦ Destination IP Address The IP address of the device to be Pinged.
♦ No. of Pings Number of times the Switch should send the Ping (1-255). If zero is chosen, the Switch will
continue Pinging indefinitely.
In the lower part of the Ping Test screen, you can view the Results of the Ping test.

Save Settings to TFTP Server

Choose Save Settings to TFTP Server from the Utilities menu (under System Utilities on the main
menu) to access the following screen:
Press START to begin the upload. The result will be displayed in the lower part of the screen.
The fields you can set are:
♦ Server IP Address The IP address of the TFTP server where you wish to save the settings for the
Switch.
Using the Console Interface
Figure 6-43. Ping Test screen
Figure 6-44. Save Settings to TFTP Server screen
Modular Ethernet Switch User's Guide
63