Connecting And Using The Mouse; Turning The Dvr On/Off And Auto Recovery - Swann DVR4-5000 Operating Instructions Manual

Using the Mouse
Attaching the Mouse
Plug the PS2 connector for the
mouse into the PS2 port on the back
of the DVR.
Note that the USB port on the side of
the DVR does not support a mouse
being connected. The DVR is com-
patible with a PS2 mouse only.
Using the PS2 Mouse
When a mouse is connected, a cursor will be displayed on the screen which can be
moved by moving the mouse, much like the mouse cursor on a computer.
Click the left mouse button to select an item or to change a setting in a menu.
Additionally, in quad-view, click a channel to enlarge it to full-screen.
When in the menu system, use the right mouse button to go up one level. When
in the live viewing or playback mode, right clicking the screen will bring up a quick-
task bar, containing playback controls and a menu icon. These operate in the same
manner as the physical buttons they represent.

Turning the DVR On/Off and Auto Recovery

Powering the DVR On/Off
To turn on your DVR connect the Power Adapter to the DC 12V input on the back
of the unit. Turn the master power switch on the back of the DVR on. This will
power on the DVR itself.
If the screen does not turn on, press and hold the power button on the top of the
DVR.
To turn the screen off, press and hold the power button on the top panel. To com-
pletely turn off the DVR, use the master power switch on the rear panel.
Auto-Recovery Feature
The DVR4-5000™ is equipped with an Auto-Recovery feature. Should a power
outage occur while you are recording the DVR will automatically resume recording
once power is restored.
8 8