2) Check the Ultra Pure filter cartridge to make sure that it is clean and
not impeding the flow of water. If the filter is dirty, clean it and rein-
stall.
3) A flow switch has malfunctioned. The spa will operate but the
heater will not activate. Contact your local Authorized Dimension
One Spas dealer.
F L O W S E N S O R
When "FLOW SENSOR ERROR" is displayed on the LCD, the flow
switch has malfunctioned. Contact your local Authorized Dimension
One Spas dealer, or authorized service center.
I C E
When "ICE CONDITION" and the water temperature are displayed on
the LCD, the air temperature in the equipment can has gone below a
factory preset level, and the system has activated "Smart Winter Mode".
It will then automatically activate the pump(s) to circulate water. This
is a normal spa function, no corrective action is necessary.
H I G H L I M I T S E N S O R
When "HIGH LIMIT SENSOR" is displayed on the LCD, the high limit
sensor is non-functional. Contact your local Authorized Dimension One
Spas dealer, or authorized service center.
T E M P S E N S O R
When "TEMP SENSOR" is displayed on the LCD, the water tempera-
ture sensor is non-functional. Contact your local Authorized Dimension
One Spas dealer, or authorized service center.
C OO L I N G
When "COOLING" and the water temperature are displayed on the
LCD, the water temperature has reached 2˚ above the set temperature.
The circulation pump and ozone generator will turn off to allow the
water to cool back to the set temperature. This is a normal spa function.
No corrective action is necessary.
1999 Owner's Manual
36