Status; Camera Status - D-Link Mydlink DNR-322L User Manual

Section 3 - Configuration
This page displays the connection and recording status of your cameras.
Connection Shows the camera connection status. The user can click

Status:

Connect or Disconnect to change the connection status.
Recording Shows the recording schedule and current recording status of
Status: the cameras. Please note that if the camera is disconnected,
the recording may continue but will produce blank video.
Frame Rate: Displays the frame rate of the camera.
Bit Rate: Displays the transmission bit rate of the camera.
Note: If the Frame Rate or Bit Rate is too low, please check the
your network configuration between cameras and NVR. If the
bit rate is too high, it will cause the Live Video display slow or
lag, please modify the quality or bitrate setting in the camera
web GUI accordingly.
Disk Status: Shows the hard drive space and estimated remaining recording
time status.
Note: The recording time information is estimated by current
bit rate. This may change each time a user refreshes this page.
D-Link DNR-322L User Manual
Status

Camera Status

53