Power And Device Selection - D-Link Mydlink DNR-322L User Manual

Section 3 - Installation

Power and Device Selection

Connect the power adapter to the power receptor on the back of the device. Press the
power button located under the faceplate LEDs to turn on the device. Click Next to
continue.
With the power on check that the Power LED is solid. If it is solid, answer Yes to the
confirmation window otherwise select No and wait for the power connection to the NVR.
If the connection is good then check that the hard drives are installed correctly and have
no other issues. Click Next to continue.
Note: When you select your device from the list, it will cause the LEDs to blink to confirm
the device selection.
D-Link DNR-322L User Manual 13