Canon PIXMA MG55500 Online Manual page 97

Note
You can also set intensity/contrast on the Quick Setup tab by choosing Photo
Printing under Commonly Used Settings, and then choosing Color/Intensity
Manual Adjustment under Additional Features.
7. Complete the setup
Click OK on the Main tab.
Then when you execute printing, the document is printed with the intensity/contrast
that was adjusted by the pattern print function.
Important
When Print a pattern for color adjustment is selected on the Color Adjustment tab,
the following items are grayed out and cannot be set:
• Preview before printing on the Main tab
• Stapling Side and Specify Margin... on the Page Setup tab (When Duplex Printing
is set, only Stapling Side can be set.)
You can print a pattern only if the Page Layout setting on the Page Setup tab is
Normal-size or Borderless.
Depending on your application software, this function may not be available.
Related Topics
Adjusting Color Balance
Adjusting Color Balance Using Sample Patterns (Printer Driver)
Adjusting Intensity
Adjusting Contrast
97