Canon PIXMA MG55500 Online Manual page 131

Booklet Printing dialog box
This dialog box allows you to set how to bind the document as a booklet.
Printing only on one side and printing a page border, can also be set in this
dialog box.
The settings specified in this dialog box can be confirmed in the settings preview
on the printer driver.
Preview Icon
Shows the settings made on the Booklet Printing dialog box.
You can check what the document will look like when printed as a booklet.
Margin for stapling
Specifies which side of the booklet is to be stapled.
Insert blank page
Selects whether to print the document on one side or both sides of the
booklet.
Check this check box to print the document on one side of the booklet and
select the side to be left blank from the list.
Uncheck this check box to print the document on both sides of the booklet.
Margin
Specifies the width of the stapling margin.
The specified width becomes the stapling margin from the center of the
sheet.
Page Border
Prints a page border line around each document page.
Check this check box to print the page border line.
Uncheck this check box if you do not want to print the line.
Duplex Printing
Selects whether to print the document automatically on both sides or one side of a sheet of
paper.
Check this check box to print the document on both sides.
Uncheck this check box to print the document on one side only.
This function can be used only when Plain Paper , Hagaki A, or Hagaki is selected for
Media Type and one of Normal-size, Fit-to-Page, Scaled, or Page Layout is selected.
Automatic
Selects whether duplex printing is to be performed automatically or manually.
This check box will be enabled if Booklet is selected from the Page Layout list or the
Duplex Printing check box is checked.
131