Canon PIXMA MG55500 Online Manual page 132

To perform duplex printing automatically, check this check box.
To perform duplex printing manually, uncheck this check box.
Print Area Setup...
Opens the Print Area Setup dialog box
automatic duplex printing.
This button will be enabled if automatic duplex printing is set when Borderless is
not selected.
Print Area Setup dialog box
When you perform duplex printing, the print area of the document becomes
slightly narrower than usual. Therefore when a document that has small margins
is printed, the document may not fit on one page.
This dialog box allows you to set whether the page is to be reduced when
printed so that the document fits in one page.
Use normal-size printing
Prints the document pages without reducing them. This is the default setting.
Use reduced printing
Slightly reduces each document page so that it fits on one sheet of paper
during printing.
Select this setting when using automatic duplex printing to print a document
with small margins.
Stapling Side
Selects the stapling margin position.
The printer analyzes the Orientation and Page Layout settings, and automatically selects
the best stapling margin position. Check Stapling Side, and select from the list to change it.
You can specify the stapling margin width in the
by clicking Specify Margin....
Specify Margin...
Opens the Specify Margin dialog box.
You can specify the width of the margin.
Specify Margin dialog box
This dialog box allows you to specify the margin width for the side to be stapled. If a
document does not fit on one page, the document is reduced when printed.
Margin
Specifies the width of the stapling margin.
The width of the side specified by Stapling Side becomes the stapling margin.
in which you can configure the print area for
Specify Margin dialog box
132
that is opened