Canon PIXMA MG55500 Online Manual page 148

Do not use quiet mode
Select this option when you wish to use the machine with volume of normal
operating noise.
Always use quiet mode
Select this option when you wish to reduce the operating noise of the machine.
Use quiet mode during specified hours
Select this option when you wish to reduce the operating noise of the machine
during a specified period of time.
Set the Start time and the End time of the quiet mode you wish to be activated. If
both are set to the same time, the quiet mode will not function.
Important
You can set the quiet mode from the operation panel of the machine, the
printer driver, or ScanGear (scanner driver).
No matter how you use to set the quiet mode, the mode is applied when you
perform operations from the operation panel of the machine or printing and
scanning from the computer.
If you specify a time for Use quiet mode during specified hours, quiet mode
is not applied to operations (copy, direct print, etc.) performed directly from the
machine.
Custom Settings
Opens the Custom Settings dialog
Perform this function to change the settings of this printer.
Note
If the printer is off or bi-directional communication is disabled, a message may appear
because the computer cannot collect the printer status.
If this happens, click OK to display the most recent settings specified on your computer.
Custom Settings dialog box
When you click Custom Settings, the Custom Settings dialog box is displayed.
If necessary, switch between various modes of machine operation.
Prevent paper abrasion
The printer can increase the gap between the print head and the paper during high-
density printing to prevent paper abrasion.
Check this check box to enable this function.
Uncheck this check box if you do not want to enable this function.
box.
148