Canon PIXMA MG55500 Online Manual page 46

Important
Stamp Text appears grayed out and is unavailable when Date/Time/User
Name is selected.
• Placement tab
Select the stamp position from the Position list. You can also select Custom from
the Position list and specify coordinates for X-Position and Y-Position.
You can also change the stamp position by dragging the stamp in the preview
window.
To change the stamp position angle, type a value in the Orientation box directly.
Important
Orientation cannot be changed when Bitmap is selected for Stamp Type on
the Stamp tab.
5. Save the stamp
Click the Save settings tab and enter a title in the Title box, and then click Save.
Click OK when the confirmation message appears.
Note
Spaces, tabs, and returns cannot be entered at the beginning or end of a title.
6. Complete the setup
Click OK. The Stamp/Background (Stamp) dialog box opens again.
The registered title appears in the Stamp list.
Changing and Registering Some of Stamp Settings
1. Select the stamp for which the settings are to be changed
Select the Stamp check box in the Stamp/Background (Stamp) dialog box. Then
from the list, select the title of the stamp to be changed.
2. Click Define Stamp...
The Stamp Settings dialog box opens.
3. Configure the stamp while viewing the preview window
4. Overwrite save the stamp
46