Universal Connector Cover - Motorola ASTRO XTSTM 2500 User Manual

Universal Connector Cover

The universal connector cover is located on the antenna side of the
radio. It is used to connect certain accessories to the radio.
Note: To prevent damage to the connector, shield it with the
connector cover when not in use.
Remove the Connector Cover
1 Insert a flat-bladed
screwdriver into the area
between the bottom of the
cover and the slot below the
connector.
2 Hold the top of the cover with
your thumb while you pry the
bottom of the cover away
from the radio with the
screwdriver.
Attach the Connector Cover
1 Insert the hooked end of the
cover into the top of the
connector. Press downward
on the cover's top to seat it
into the slot.
2 Press the cover's lower tab
below the connector until it
snaps in place.
ASTRO XTS 2500/XTS 2500
I
Model III
General Radio Operation
23