Battery Tips; Screen Locks; Partially Locked Screen; Fully Locked Screen - Sea Breeze STS32 Manual

STS32/STS32H Touchscreen Programmable Thermostat
WALLPLATE
BATTERIES(2)
- + - +
TERMINAL SCREW BLOCK
PINS ON BACK OF
THERMOSTAT
4. Align the screw blocks with the pins on the
5. Push the thermostat straight onto the
back of the thermostat.
wallplate until it snaps into place.

Battery Tips

1. Replace the batteries as soon as "Batt"
flashes in the display. The Battery indicator
flashes in the display one month before the
batteries run down completely.
2. Always use fresh AA alkaline batteries.
Non-alkaline batteries do not last as long
and can leak, causing thermostat damage.
3. Although the thermostat has a Low
Battery indicator, replace the batteries once
a year to prevent the thermostat and
heating/cooling system from shutting down
due to lack of battery power.

Screen Locks

TUE
PM
Room
SCREEN
Running As SCHED
LOCKED
Set To
SYSTEM
HEAT
MORE SCHED HOLD CLOCK SCREEN
78
STS32/STS32H Touchscreen Programmable Thermostat

Partially Locked Screen

When partially locked, the screen indicates
Screen Locked for 5 to 7 seconds whenever the
user attempts to press a key that is locked.
Pressing a locked key, while Screen Locked is
shown, flashes "Screen Locked" on the
screen.
In this mode, all keys are locked except the
Temperature Up and Down arrow keys:
User can change temperature up or down
but cannot change schedule settings.
Temporary temperature change lasts until
next scheduled period and that time shows
on screen.
To cancel temperature override and begin
following schedule, press CANCEL key.
To unlock screen, see Installer Setup section.

Fully Locked Screen

In this mode, all keys are locked and not
functional. To unlock screen, see Installer
FAN
Setup section. The screen continuously
AUTO
displays Screen Locked.
79