Installer System Tests - Sea Breeze STS32 Manual

STS32/STS32H Touchscreen Programmable Thermostat
UP ARROW KEY
SYSTEM STAUS SYSTEM TEST
ADVANCES TO
NUMBER NUMBER
NEXT SYSTEM
TEST NUMBER
DONE
DOWN ARROW UP ARROW DONE KEY
TURNS THE TURNS THE EXITS INSTALLER
SYSTEM TEST
SYSTEM OFF SYSTEM ON
Fig. 30. Review thermostat buttons used during Installer System Test.

Installer System Tests

System Test Number
Test 1
Test 2
Test 3
Test 4
Press the Next button to go to the beginning of the Installer Setup or press the Done button to exit the Installer
System Test.
60
STS32/STS32H Touchscreen Programmable Thermostat
Table 4. Installer System Test.
System Status Number and
Test Type
Description
1-Cool stage 1 and stage 2 turn on.
Cooling System Test
0-Cool is off.
1-Fan turns on.
Fan System Test
0-Fan turns off.
1-Heat stage 1 and stage 2 (aux
Heating System Test heat) turn on.
0-Heat is off.
1-Emergency heat and L turn on.
Emergency Heat Test
0-Emergency heat and L turns off.
61