Installer Setup - Sea Breeze STS32 Manual

STS32/STS32H Touchscreen Programmable Thermostat

INSTALLER SETUP

Follow these steps to enter the Installer 2. Press and hold the two blank keys on
Setup: either side of the center blank key for
1. Press and release the SYSTEM Key. approximately five seconds until screen
changes.
TUE
AM
Room
Running As SCHED
Set To
SYSTEM
FAN
AUTO
AUTO
MORE SCHED HOLD CLOCK SCREEN
TUE
AM
Room
Set To
SYSTEM
HEAT
OFF
COOL
CANCEL DONE
48
STS32/STS32H Touchscreen Programmable Thermostat
3. Release the two blank keys when the 4. See screen below to review how the
screen on the thermostat matches the thermostat keys are used during Installer
screen below. Setup. See Tables 3-5 for the Installer
Setup Numbers and Settings.
DONE
5. Press the DONE key to exit the Installer
Setup screen.
ADVANCE TO
INSTALLER SETUP
NUMBER NEXT INSTALLER
SETUP
DONE
CURRENT CHANGE THE PRESS TO EXIT
SETTING CURRENT INSTALLER SETUP
SETTING
49