JabloCom GDP-04i User Manual page 16

M enu > S e t tin g s > Remote c ont r ol s >
Choose
Voic e me s s a ge
Call to the GDP-04i RF from another phone. GDP-04i RF
receives the call automati cally. Aft er 4 beeps it starts
recording. The voice message could be
up to 15 seconds long. If you want a shorter message
Stop
press . The phone than replays the message back.
S ave
Press for saving the voice message.
If you like to check the recorded message, go to the
Voic e me s s a ge
menu
Aft er pressing the panic butt on or acti vati ng the sensor, the emergency messages are sent fi rst. Then phone
calls to the fi rst phone number. When the call is connected, phone plays the voice message twice and than
connects audio to the hands free. When the call is fi nished, the phone calls to all other numbers in the same
way. The length of the call is limited to 5 minutes.
If you press a panic butt on during a ringing incoming call, the phone receives the call to the hands free mode.
Try
Pressing the panic butt on during incoming call accepts the call on the handsfree. Phone can be operated by
one wireless butt on both way (making calls, receiving calls).
EN
��������� � �������� �����
A wireless relay can be operated via SMS sent to GDP-04i RF or from the phone's menu. All setti ngs are done in the
M enu > S e t tin g s > W irele s s relay
If you enter the
thru all necessary setti ngs.
To enroll GDP-04i RF into a new wireless relay (for example AC-88) switch the relay into the enrollment mode and
Enr oll new relay
choose
For changing the output name go to the menu
W irele s s relay > S e t tin g s .
change it.
M o de
Use for switching between
O n/O f f
mode, it reacts to the SMS message accordingly. If it is in the
mode, it switches on only for 2 seconds.
For operati ng the outputs send an SMS to the GDP-04i RF phone number.
Syntax of the SMS is:
<Acti on>
<Output name>
If you like to switch the output on for the limited ti me, send an SMS
Examples:
ON deviceX
OFF DEVICEY
ON DEVICEX 3:00:00
XC_GDP-04i.ENG.MAN.Manual.15.A
for recording a new voice message.
Play
and press .
the emergency functi on aft er completi ng setti ngs.
menu.
M enu > S e t tin g s > W irele s s relay
on the phone. The phone sends the enrollment signal immediately.
Use right arrow or green butt on to
O n/O f f
<Acti on> <Output name>
ON
is for switching on the output,
This text cannot be changed and depends on the selected language.
DEVICEX
is
Switches on permanently the output PgX of the wireless relay
Switches off permanently the output PgY of the wireless relay
Switches on for 3 hours the output PgX of the wireless relay
M enu > S e t tin g s >
Pul s e
and . If the output is in the
where:
DEVICEY
or as a default. User can modify the output name.
<Acti on> <Output name> HH:MM:SS
- 14 -
menu for the fi rst ti me, the phone guides you
Pul s e
OFF
for switching the output off .