Smartkey With Keyless-Go; Messages In The Multifunction Display - Mercedes-Benz CL Operator's Manual

Cl class
Hide thumbs Also See for CL:
Table of Contents

Advertisement

Vehicle status messages in the multifunction display
440
Display messages
E
Â
Â
Â
Â
Â
Â
Â
Possible causes/consequences and X Solutions
Shift to P You have attempted to turn off the engine with the KEYLESS-
GO start/stop button and opened the driver's door with the
automatic transmission not shift to park position P.
X
Shift the automatic transmission to park position P
(
Y
page 291).
or
X
Close the driver's door.
Key
A SmartKey with KEYLESS-GO left in the vehicle was
Detected
recognized while trying to lock the vehicle from the outside.
In Vehicle
X
Take the SmartKey out of the vehicle.
Don't
This message appears for a maximum of 60 seconds if the
Forget
driver's door is opened with the engine turned off and no
Your Key
SmartKey in the starter switch. This message is only a
reminder.
X
Take the SmartKey with you when leaving the vehicle.
Take Your
You have forgotten to remove the SmartKey.
Key From
X
Remove the SmartKey from the starter switch.
Ignition
Obtain a
The SmartKey with KEYLESS-GO must be replaced.
New Key
X
Contact an authorized Mercedes-Benz Center.
Close
You tried to lock the vehicle but not all doors were closed.
Doors to
X
Close doors and lock the vehicle again.
Lock
Vehicle
Key Does
The SmartKey in the starter switch does not belong to the
Not
vehicle.
Belong to
X
Remove the SmartKey from the starter switch.
Vehicle
Replace
The batteries in the SmartKey with KEYLESS-GO are
Key
discharged.
Battery
X
Replace the batteries (
Y
page 461).

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cl 550 4maticCl 600Cl 63 amgCl 65 amg

Table of Contents