Mercedes-Benz CL Operator's Manual page 124

COMAND navigation system (during route guidance)
122
The Off Road message and an arrow showing
the compass heading to the destination
appear on the display.
As soon as the system can allocate the
vehicle position to the map again, route
guidance continues in the usual way.
Navigation announcements
G
Warning!
Navigation announcements are intended to
direct you while driving without diverting your
attention from the road and driving.
Please always use navigation announcements
instead of consulting the map display for
directions. Consulting the symbols or map
display for directions may cause you to divert
your attention from driving and increase your
risk of an accident.
i If Chinese is set as the system language,
the navigation announcements are in
English. For information on how to set the
system language see (
Navigation announcements are muted
during telephone calls. You can, however,
call up a current announcement at any
time. You can also call up a current
announcement at any time if you have
missed an announcement.
Route guidance is active already.
X
Calling up a current announcement:
Select Navi Q RPT.
or
X
Press favorite button h if the button has
been programmed with this function
( Y page 81).
Y page 81).
X
Switching off navigation messages:
Press button 8 during an
announcement.
You will see the message The driving
instructions have been muted. for a
short while.
i The announcements remain switched off
even if you start a new route guidance or if
COMAND is switched off/on with button
u.
If you switch COMAND off by removing the
SmartKey from the starter switch and then
switch the ignition back on after more than
3 minutes, the announcements are
automatically switched back on.
X
Switching navigation announcements
back on manually: Select Navi Q RPT.
X
Adjusting volume of the messages:
Adjust the volume during an automatic
announcement ( Y page 76).
or
X
Call up an announcement manually using
Navi Q RPT and adjust the volume
( Y page 76).
i You can use the function Audio
Fadeout (
Y page 93) to reduce the volume
of audio sources during navigation
announcements.
COMAND navigation system (during
route guidance)
Cancel route guidance
X
Select Destination Q Cancel Route
Guidance in map view with the menu
system displayed (
Continuing canceled route guidance
X
Select Destination Q Continue
Route Guidance in map view with the
menu system displayed (
COMAND calculates the route.
Y page 89).
Y page 89).