Maserati Quattroporte Automatic 2009 Owner's Manual page 194

Table of Contents

Advertisement

M139_UM_usa1.book Page 194 Monday, September 1, 2008 2:39 PM
Spare wheel (emergency wheel -
optional)
With the spare wheel fitted,
never exceed the maximum
speed of 50 mph (80 Km/h);
when this limit is exceeded, the MSP
system deactivates, consequently
jeopardizing the vehicle's stability,
road holding and braking. Avoid
accelerating at full throttle, braking
sharply and cornering at high speeds.
On request, the vehicle can be fitted
with a spare wheel (emergency wheel),
jack and tools for wheel replacement.
The spare wheel is of a special type and
is housed in the luggage
compartment. The spare wheel is
supplied deflated, for space-saving
6
reasons, with an electric compressor to
inflate it.
If a tire is punctured, proceed as
follows:
– Stop the vehicle in safe place, where
it does not represent a hazardous
situation for the road traffic and
where the wheel can be replaced
safely. The vehicle must be parked
on a level and firm ground.
– Check that the electric parking brake
is applied.
194
If a tire gets a puncture
– Select P (PARK), then turn the key to
position STOP.
– If necessary, turn on the hazard
warning lights and position the
warning triangle at the prescribed
distance.
WARNING: In the event of downhill or
uneven roads, place wedges or other
objects under the wheels, in order to
hold the vehicle.
– Free the bag and remove it from the
luggage compartment..
Remove the spare wheel, the jack, the
compressor and the tools for wheel
replacement.
The box located inside the spare wheel
contains:
– an electric compressor H, including a
pressure gauge and the union for
inflating the spare wheel
H
I
J
K
– a wrench I for the wheel studs and
for the jack operation
– a socket J, to be fitted on the wrench
to loosen the wheel studs and to
operate the jack
– a jack K.
WARNING: If the vehicle is equipped
with a spare wheel, the repair kit is not
provided.
– Open the compressor cover and take
out the pipe with the pressure gauge
L and the with connector M for the
power plug.
– Unscrew the spare wheel's valve cap
and attach the inflation pipe union N
on the valve.
N
O
L
M

Advertisement

Table of Contents
loading

Table of Contents