Table of Contents
Advertisement
M139_UM_usa1.book Page 120 Monday, September 1, 2008 2:39 PM
Storing the seats and external
rear-view mirrors positions
The system allows different positions
to be stored and recalled for the
driver's seat and for the external rear-
view mirrors (buttons I).
Memorization is only possible with the
ignition key in position MAR (ON).
Adjust the position of the seat, the
headrest, the external rear-view
mirrors and the steering wheel, then
engage the reverse gear and
reposition the external passenger side
mirror to ensure the best possible
4
visibility to perform the maneuver,
then disengage the reverse gear. Next
press one of the three buttons "1",
"2" or "3", each one corresponding to
a memorizable position, for 3 seconds
until you hear a double confirmation
tone.
Lumbar support adjustment is not
included in the seat position
memorization.
120
Front seats
The memorization of a new seat
position cancels the one previously
memorized with that particular
button.
To recall one of the stored positions
with the door open, press the relative
button "1", "2" or "3" briefly.
To recall the a stored position with the
door closed, press the corresponding
button until hearing a tone that
confirms the seat has stopped.
WARNING: To stop the seat, press one
of the buttons - "1", "2" or "3" -, or
one of the adjustment controls.
WARNING: Malfunctioning of the seat
control unit is indicated by a sequence
of 5 tones emitted when the ignition
key is turned to position STOP: contact
your local Authorized Maserati Dealer
to correct the failure.
Headrest
The headrests are adjusted electrically
for the height and manually for the
tilting position.
Remember that the headrests
must be positioned so that
their upper edge is aligned
with the top of the occupant's head.
In fact, only in this position can they
provide the support required in the
event of a bumper-to-bumper
collision.
To adjust the headrests' vertical
position, move the lever B upwards or
downwards.
B
Advertisement
Chapters
Table of Contents
