HOW TO SET THE FACTORY PRESETS
Turn off the Display by pressing POWER on the Display.
Press and hold down RESET on the AVC System and press POWER on the Display to turn on the System.
All setting items (except TV channel) return to the factory presetting.
NOTE
• Running the factory presetting operation also clears the password.
You can run the Auto Installation again by using the following steps.
1
Turn on the power of the Display and the AVC System.
2
Press MENU. (Make sure the menu screen displays.)
3
Press c/d to select "Setup".
4
Press a/b to select "Auto Installation", and then press ENTER.
5
Press c/d to select "Yes", and then press ENTER.
The password is
NOTE
• As a precautionary measure, make a note of your password above, scissor it from this manual, and keep it in a familiar
place.
LC-45G1X(E)-K
69
.
04.10.15, 10:13 AM
69