Auto Installation; Programme Setup; Auto Search - Sharp Aquos LC-45G1X Operation Manual

Basic adjustment settings

Auto installation

You can run auto installation again, even after setting
up the preset channels.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Setup".
3
Press a/b to select "Auto Installation", and
then press ENTER.
[ Setup ... Auto Installation ]
MENU
Setup
Auto Installation

Programme Setup

Child Lock
Speaker Setup
Position
WSS
4:3 Mode
Rotate
Language
Text Language
4
If you already set the password, enter it here.
• See page 56 for setting password.
– – – –
5
Press c/d to select "Yes", and then press
ENTER.
6
Press a/b to select the desired language
listed on the screen, and then press ENTER.
After this setting, auto search starts with the
following order.
1 Programme auto search
2 Auto labelling
3 Auto sorting
You do not need to do anything during the

auto search.

NOTE
• After performing step 6, the menu screen shown in step 3
will reappear. Do not turn off the System before then,
because the System is saving the data found.
LC-45G1X(E)-c
Option
[On]
[Panorama]
[Normal]
[English]
[West Europe]
23
Programme setup
You can run the auto installation procedure again at
any time by accessing the Setup menu and
Programme Setup. Channels can be tuned
automatically or manually.
Auto search
You can also automatically search and download TV
channels by performing the procedure below. This is
the same function as programme auto search in auto
installation.
1
Press MENU and the MENU screen displays.
2 Press c/d to select "Setup".
3
Press a/b to select "Programme Setup",
and then press ENTER.
If you have already set the password, enter
it here.
• See page 56 for setting password.
[ Setup ... Programme Setup ]
MENU
Setup
Auto Installation
Programme Setup
Child Lock
Speaker Setup
Position
WSS
4:3 Mode [Panorama]
Rotate
Language [English]
Text Language [West Europe]
4
Press a/b to select "Auto Search", and then
press ENTER.
5
Press c/d to select "Yes", and then press
ENTER.
• Auto search starts with the following order.
1 Programme auto search
2 Auto labelling
3 Auto sorting
NOTE
• After performing step 5, the menu screen shown in step 3
will reappear. Do not turn off the System before then,
because the System is saving the data found.
04.10.15, 10:01 AM
Option
[On]
[Normal]
23