Trolling; Adjusting Trolling Speed; Stopping Engine; Procedure - Yamaha F50F Owner's Manual

Operation
EMU30880

Trolling

EMU30890

Adjusting trolling speed

The trolling speed on outboard motors
equipped with the variable trolling RPM
switches can be adjusted approximately 50
r/min with each press of a switch.
1. " " switch
2. " " switch
40
N
R
ZMU04598
To increase the trolling speed, press the "
switch.
To decrease the trolling speed, press the
" " switch.
NOTE:
The trolling speed changes approximately
G
50 r/min each time a switch is pressed.
If the trolling speed has been adjusted, the
G
engine returns to the normal trolling speed
when the engine is stopped and restarted
or when the engine speed exceeds ap-
proximately 3000 r/min.
EMU27820

Stopping engine

Before stopping the engine, first let it cool off
for a few minutes at idle or low speed. Stop-
ping the engine immediately after operating
at high speed is not recommended.
EMU27844

Procedure

1. Push and hold the engine stop button or
turn the main switch to "
"
" (off).