Checking Wiring And Connectors; Exhaust Leakage; Water Leakage; Engine Oil Leakage - Yamaha F50F Owner's Manual

specified level if it is above the upper
mark.
1 3
1. Lower level mark
2. Oil dipstick
3. Upper level mark
7. Dispose of used oil according to local
regulations.
NOTE:
For more information on the disposal of
G
used oil, consult your Yamaha dealer.
Change the oil more often when operating
G
the engine under adverse conditions such
as extended trolling.
EMU29112

Checking wiring and connectors

Check that each grounding wire is properly
G
secured.
Check that each connector is engaged se-
G
curely.
EMU29120

Exhaust leakage

Start the engine and check that no exhaust
leaks from the joints between the exhaust
cover, cylinder head, and body cylinder.
EMU29130

Water leakage

Start the engine and check that no water
leaks from the joints between the exhaust
cover, cylinder head, and body cylinder.
2
ZMU05091
EMU29140

Engine oil leakage

Check for oil leaks on the around the engine.
NOTE:
If any leaks are found, consult your Yamaha
dealer.
EMU29163
Checking power trim and tilt / power
tilt system
EWM00430
WARNING
Never get under the lower unit while it
G
is tilted, even when the tilt support lever
is locked. Severe injury could occur if
the outboard motor accidentally falls.
Make sure no one is under the outboard
G
motor before performing this test.
1. Check the power trim and tilt unit / power
tilt unit for any sign of oil leaks.
2. Operate each of the power trim and tilt
switches / power tilt switches to check
that all switches work.
3. Tilt the outboard motor up and check
that the trim and tilt rod / the tilt rod is
pushed out completely.
1
1. Trim and tilt rod
4. Check that the trim and tilt rod / the tilt
rod is free of corrosion or other flaws.
5. Tilt the outboard motor down. Check
Maintenance
ZMU03662
63