Driving Procedure - Polaris RANGER 500 EFI 4X4 2011 Owner's Manual

Driving Procedure

1. Wear a helmet and eye protection.
2. Sit in the driver's seat and fasten the seat belt.
3. Start the engine and allow it to warm up.
4. Always use the cab nets while riding in this vehicle.
5. Apply the service brakes and shift the transmission into gear.
6. Check your surroundings and determine your path of travel.
7. Keeping both hands on the steering wheel, slowly release the brakes
and depress the throttle with your right foot to begin driving.
8. Drive slowly. Practice maneuvering and using the throttle and
brakes on level surfaces.
9. Do not carry a passenger until you have at least two hours of driving
experience with this vehicle.
OPERATION
43