FEATURES AND CONTROLS
Switches
AWD/Differential Lock Switch
The AWD/Differential Switch has three positions: All Wheel Drive
(AWD), Differential Lock/Two Wheel Drive (2WD) and Off (1WD/Turf
Mode).
Press the top of the rocker switch to engage All Wheel Drive (AWD).
See page 57 for AWD operating instructions.
Move the rocker switch to the center position to lock the differential and
operate in two wheel drive (2WD). See page 56 for Differential Lock
operating instructions.
Press the bottom of the switch to unlock the differential and allow the
rear drive wheels to operate independently (1WD). This mode of opera-
tion is well suited to turf driving or when active traction is not needed.
Brake Pedal
Depress the brake pedal to slow or stop the vehicle. Apply the brakes
while starting the engine.
Throttle Pedal
Throttle
Pedal
Brake
Push the pedal down to increase
Pedal
engine speed. Spring pressure
returns the pedal to the rest posi-
tion when released. Always check
that the throttle pedal returns nor-
mally before starting the engine.
Make sure there's adequate throt-
tle pedal freeplay. See page 85 for
throttle pedal adjustment proce-
dures.
25