New Operator Driving Procedures - Polaris ACE 900 SP Owner's Manual

New Operator Driving Procedures

1. Read and understand the owner's manual and all warning and
instruction labels before operating this vehicle.
2. Visit the Recreational Off-Highway Vehicle Association web site
and take the free on-line training course. Visit www.rohva.org or
call 866-267-2751. Hands-on training is also available through
ROHVA.
3. Perform the pre-ride inspection. See page 46.
4. Do not tow or carry cargo during this period.
5. Select an open area that allows room to familiarize yourself with
vehicle operation and handling.
6. The driver must wear helmet, eye protection, gloves, long-sleeve
shirt, long pants, over-the-ankle boots and seat belt at all times.
7. Sit in the driver's seat and fasten the seat belt.
8. Always make sure all cab doors are closed and latched when riding
in this vehicle.
9. Place the transmission in PARK.
10. Start the engine.
11. Apply the brakes and shift into low gear.
12. Check your surroundings and determine your path of travel.
OPERATION
51