Polaris RANGER 500 EFI 4X4 2011 Owner's Manual page 38

FEATURES AND CONTROLS
Instrument Cluster
Rider Information Center
Diagnostic Mode
The wrench icon will display when the gauge is in the diagnostic mode.
To exit the diagnostic mode, turn the key switch off and on. Any move-
ment of the tires will also cause the gauge to exit the diagnostic mode.
To enter the diagnostics mode:
1. Turn the key switch off and wait 10 seconds.
2. Place the transmission in PARK.
3. Hold the mode button and turn the key switch on. Release the
switch as soon as the display is activated.
4. Use the mode button to toggle through the diagnostic screens.
34