Amana AR03100 Series Owner's Manual page 8

Converting Type 2 Pressure Regulator for Use with
LP/Propane
1. Remove pressure regulator cap with a wrench.
2. Reverse pressure regulator cap.
• Cap must show "LP".
3. Place pressure regulator cap on pressure regulator
and tighten.
A—Cap
Type 2 Pressure Regulator
Converting Surface Burners for Use with LP\Propane
1. Lift the rangetop off of the range.
• A peg on each side of rangetop holds rangetop in
place.
Remove Rangetop
A
LP
2. Turn all 4 orifice hoods (tighten) counterclockwise
when facing front of range 1½ to 2 turns or until snug.
• Use ½-inch wrench.
• Do not over tighten orifice hoods. If orifice hoods are
over tightened, gas supply can be cutoff or orifice
hood threads can strip.
A
A—Orifice Hood
B—Air Shutter
Orifice hood and Air Shutter
3. Pull all 4 air shutters fully open.
Converting Oven Burner for Use with LP\Propane
1. Open broiler door and remove broiler rack, pan, and
grid.
2. Through rectangular hole on rear of broiler cavity, turn
orifice hood (tighten), clockwise when facing front of
range, 1½ to 2 turns or until snug.
• Do not overtighten orifice hoods. Orifice hoods can
strip.
Open
Fully
A—Air Shutter Screw
B—Orifice Hood
C—Air Shutter
Converting Oven Burner
3. Open air shutter fully.
8
Open Fully
B
C
B
A