1. Manuals
  2. Brands
  3. Unicorn Computer Manuals
  4. Motherboard
  5. ENDAT-K1001
  6. User manual

Unicorn Computer ENDAT-K1001 User Manual

Motherboard
Hide thumbs
Table of Contents

Advertisement

Quick Links

ENDAT-K1001 USERS MANUAL
UNICORN COMPUTER CORP.
ENDAT-K1001
User's Manual
For ENDAT-K1001 PCB ver. A3
Aug 10, 2011
Document version:
A3
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ENDAT-K1001 and is the answer not in the manual?

Questions and answers

Related Manuals for Unicorn Computer ENDAT-K1001

Summary of Contents for Unicorn Computer ENDAT-K1001

  • Page 1 ENDAT-K1001 USERS MANUAL UNICORN COMPUTER CORP. ENDAT-K1001 User’s Manual For ENDAT-K1001 PCB ver. A3 Aug 10, 2011 Document version:...

  • Page 2: Copyright Notice

    ENDAT-K1001 USERS MANUAL UNICORN COMPUTER CORP. Copyright Notice The content of this manual has been checked for accuracy. The manufacturer assumes no responsibility for any inaccuracies that may be contained in this manual. The manufacturer reserves the right to make improvements or modification to this document and/or the product at any time without prior notice.
  • Page 3 ENDAT-K1001 USERS MANUAL UNICORN COMPUTER CORP. Specification: Model ENDAT-K1001 AMD RS780E+SB710 (TDP 15+4.5 Watt) System Chipset Support AMD SEMPRON / ATHLON / ATHLON X2 / CPU Supporting PHENOM X3 / PHENOM X4 AM2/AM2+/AM3 socket CPU 2 x SODIMM sockets Memory...

  • Page 4: Table Of Contents

    ENDAT-K1001 USERS MANUAL UNICORN COMPUTER CORP. TABLE OF CONTENTS CHAPTER 1. INTRODUCTION............6 1-1. FEATURES ....................7 1-2. UNPACKING .................... 8 1-3. ELECTROSTATIC DISCHARGE PRECAUTIONS ........8 1-4. MOTHERBOARD LAYOUT ..............9 CHAPTER 2. SETTING UP THE MOTHERBOARD ..... 10 2-1.
  • Page 5 ENDAT-K1001 USERS MANUAL UNICORN COMPUTER CORP. CHPATER 4. VGA, LCD AND DRIVERS........40 4-1. VGA FEATURE..................40 4-2. DRIVER UTILITY INSTALLATION GUIDE..........41 APPENDIX A: FLASH MEMORY UTILITY ........42 APPENDIX B: LIMITED WARRANTY .......... 43...

  • Page 6: Chapter 1. Introduction

    3D performance across the whole spectrum of 3D applications. This future-proof core ensures compatibility with both current and upcoming 3D applications. ENDAT-K1001 not only provide the ideal solution for Hi-End Gaming system, but also can be adapted in various applications such as digital signage, POS, kiosks, networking systems, control terminals and other embedded systems.

  • Page 7: Features

     1 x LVDS connector support brightness control Software Support  Drivers for major embedded operating systems: Linux, Windows XP, Windows XP embedded, Windows7 and Windows CE 6.0. Ordering information: ENDAT-K1001: Standard version. (ATX) ENDAT-K1001W: Wide range DC input. (+12V~+24V)

  • Page 8: Unpacking

    ENDAT-K1001 USERS MANUAL UNICORN COMPUTER CORP. 1-2. Unpacking The motherboard comes securely packaged in a sturdy cardboard shipping carton. In addition to the User's Manual, the motherboard package includes the following items:  ENDAT-K1001 System Board  SATA Cables ...

  • Page 9: Motherboard Layout

    ENDAT-K1001 USERS MANUAL UNICORN COMPUTER CORP. 1-4. MOTHERBOARD LAYOUT.

  • Page 10: Chapter 2. Setting Up The Motherboard

    ENDAT-K1001 USERS MANUAL UNICORN COMPUTER CORP. Chapter 2. Setting up the Motherboard 2-1. Jumpers and Connectors Connectors Overview: Function Connectors ATX1 ATX Power Connector DC-IN1 DC Power Supply Connector HDDPWR1 HDD Power Connector CPU Socket DDR-A1, DDR-B1 DDR2 SO-DIMM Socket...
  • Page 11 ENDAT-K1001 USERS MANUAL UNICORN COMPUTER CORP. Box Headers, Pin Headers Overview: Function Connectors KBMS1 PS/2 KB/MS Header JKB1 External PS/2 Device Header (KB) COM-A1 (COM1) COM1 / 2 Box Header COM-A2 (COM2) JUSB1, JUSB2 USB Ports Header JAUD1 AUDIO Headers...
  • Page 12 ENDAT-K1001 USERS MANUAL UNICORN COMPUTER CORP. Part 1: Onboard Jumpers JBAT1: CMOS Data Clear (1x3, 2.0mm) Normal Pin 1-2 * Close for clear CMOS Pin 2-3 LCDPWR1: LCD Voltage Select (2x3, 2.0mm) LCDPWR1 Voltage 1-2* +3.3V * +12V...
  • Page 13 ENDAT-K1001 USERS MANUAL UNICORN COMPUTER CORP. I-PWR1: Inverter ON/OFF Level Select (2x3 with 2.0mm) I-PWR1: LCD Backlight Voltage Select (2x3 with 2.0mm) Inverter ON/OFF Level Select I-PWR1 Voltage +3.3V* LCD Backlight Voltage Select I-PWR1 Voltage +12V* GPIO2: LCD Brightness Select (2x4 with 2.0mm) Pin No.
  • Page 14 ENDAT-K1001 USERS MANUAL UNICORN COMPUTER CORP. KBPWR1: Keyboard Power Select I-PWR1 Voltage +5V Standby * Part 2: Onboard Connectors and Headers KBMS1: PS/2 Keyboard / Mouse Header (2x5 with 2.54mm) Pin No. Signal (KB) Pin No. Signal (MS) KB Data...
  • Page 15 ENDAT-K1001 USERS MANUAL UNICORN COMPUTER CORP. JKB1: External PS/2 Device Header (1x7 with 2.0mm) Pin No. Signal (KB) Pin No. Signal (MS) KB Data Out KB Data In KB Clk Out KB Clk In +5V(DC) COM-A1 (COM1) / COM-B1 (COM2): COM port Box Headers (2x5 with 2.0mm)
  • Page 16 ENDAT-K1001 USERS MANUAL UNICORN COMPUTER CORP. JUSB1, JUSB2: Pin Header for USB port (2x5 with 2.54mm) Function Function USB_VCC USB_VCC USBD4/6- USBD5/7- USBD4/6+ USBD5/7+ USB_GND USB_GND USB_GND AUDIO1: 6 Ports Audio Jack CEN/LFE LINE IN1 SURR FRONT SIDE MIC1...
  • Page 17 ENDAT-K1001 USERS MANUAL UNICORN COMPUTER CORP. JAUD1: AUDIO Headers for Front panel (2x5 with 2.54mm) Pin No. Function Pin No. Function MIC2-L GND_AUD MIC2-R LINE2-R MIC2-Detect Front Panel Detect LINE2-L LINE2-Detece SMB1: SM Bus Pin Header Connector (1x4 with 2.0mm) Pin No.
  • Page 18 ENDAT-K1001 USERS MANUAL UNICORN COMPUTER CORP. GPIO1: DIGITAL I/O Pin Header Connector (2x6 with 2.0mm) Function Function +3.3V DIO-P30 DIO-P31 DIO-P32 DIO-P33 DIO-P34 DIO-P35 DIO-P37 DIO-P36 * Notice: The DIO-P36 (pin-9 of GPIO1) is an alternate pin of chipsets. It’ll output a low frequency clock till the BIOS finished the boot operation.
  • Page 19 ENDAT-K1001 USERS MANUAL UNICORN COMPUTER CORP. LCDBK1: Inverter Header (2x3 with 2.0mm) Function Function INV-BRT BKL ON/OFF Notice1: The pin-3 of LCDBK1 voltage will change by GPIO2 or S/W control Notice2: The pin-4 of LCDBK1 voltage will change by I-PWR1 (pin-1, 3, 5) AUXPWR1: Reserved Power for LCD (1x2 with 2.0mm)
  • Page 20 ENDAT-K1001 USERS MANUAL UNICORN COMPUTER CORP. LVDS1: LVDS (1.25mm) Dual Channel Pin No. Signal Pin No. Signal VBL (+12V) VBL (+12V) DISP.ON/OFF LCD Power LCD Power TxO0+ TxO0- TxO1+ TxO1- TxO2+ TxO2- TxO3+ TxO3- TxOC+ TxOC- TxE0+ TxE0- TxE1+ TxE1-...
  • Page 21 ENDAT-K1001 USERS MANUAL UNICORN COMPUTER CORP. AT-ON1: AT Power Mode (1x2 with 2.0mm) AT-ON1 Mode ATX mode Open AT mode Close ATXPWR: ATX Power connector 3.3V 3.3V –12V 3.3V PS ON –5V POWER OK 5V SB +12V DC-IN1: DC Input connector (1x2 with 3.96mm)

  • Page 22: Installing Memory

    ENDAT-K1001 USERS MANUAL UNICORN COMPUTER CORP. 2-2. Installing Memory The ENDAT-K1001 offers two 200pin DDR2 SODIMM sockets supporting up to 8GB of memory. The speed of DDR memory can be DDR400, DDR533, DDR667 or DDR800. 2-3. Graphic Memory The ENDAT-K1001 integrated ATI Radeon™ HD 3200 DirectX® 10 GFX engine with 128MB DDR2 local frame buffer memory (Side Port ;...
  • Page 23 // Set WDT Time-out MSB CRF73 outportb(0x2f,tt); // IF SET CRF73 Start WDT Time (Clear REG) void show_ver() unsigned char tmp0; printf("Designed by attila of UNICORN computer corp. \n2010/10/18 release version:1.0a\n"); printf("This program is design for test Watch Dog Timer for ENADT-K1001 (ITE8718F).\n");...

  • Page 24: Digital I/O

    ENDAT-K1001 USERS MANUAL UNICORN COMPUTER CORP. 2-5. Digital I/O 1) Pin out of digital I/O header (GPIO1): Pin No. Function Pin No. Function +3.3V DIO-P30 DIO-P31 DIO-P32 DIO-P33 DIO-P34 DIO-P35 DIO-P37 DIO-P36 * Notice: The DIO-P36 (pin-9 of GPIO1) is an alternate pin of chipsets. It’ll output a low frequency clock till the BIOS finished the boot operation.

  • Page 25: Lcd Backlight On/Off Control

    ENDAT-K1001 USERS MANUAL UNICORN COMPUTER CORP. 2-6. LCD Backlight ON/OFF Control 1) Inverter Power/ON/OFF Signal level select: I-PWR1 (Pin2, 4, 6): LCD Backlight Voltage Select (2x3 with 2.0mm) Voltage +12V * I-PWR1 I-PWR1 (Pin1, 3, 5): Inverter ON/OFF Level Select (2x3 with 2.0mm) Voltage +3.3V *...

  • Page 26: Lcd Brightness Control

    ENDAT-K1001 USERS MANUAL UNICORN COMPUTER CORP. 2-7.LCD Control Brightness 1) Inverter Brightness Digital level select: LCDBK1: Inverter Header (2x3 with 2.0mm) Pin No. Function Pin No. Function INV-BRT BKL ON/OFF 2) Brightness Control port address: This is alternate function with VBIOS (VESA) to offering an easy way to control the LCD backlight ON and OFF as need.

  • Page 27: Chapter 3. Ami Bios Setup

    ENDAT-K1001 USERS MANUAL UNICORN COMPUTER CORP. Chapter 3. AMI BIOS SETUP BIOS Setup Utility Use the BIOS CMOS setup program to modify the system parameters to reflect the environment installed in your system and to customize the system as desired.

  • Page 28: Main

    ENDAT-K1001 USERS MANUAL UNICORN COMPUTER CORP. 3-1. Main The Standard Setup is used for the basic system configuration, such as date etc. ˙AMIBIOS, Processor, System Memory. These Items show the firmware and hardware specifications. ˙System Time This setting allows you to set system time. The time format is Hour:Minute:Second.
  • Page 29 ENDAT-K1001 USERS MANUAL UNICORN COMPUTER CORP. CPU Configuration PowerNow This setting enables/disables the generation of ACPI_PPC, _PSS, and _PCT objects. IDE Configuration...
  • Page 30 ENDAT-K1001 USERS MANUAL UNICORN COMPUTER CORP. SuperIO Configuration Serial Port 1/2 Address Select an address and a corresponding interrupt for the specified serial port. Restore on AC Power Loss by IO Power Off Leaves the computer in the power off state.
  • Page 31 ENDAT-K1001 USERS MANUAL UNICORN COMPUTER CORP. Hyper Transport Configuration HT Link Speed This item allows you to set the Hyper-Transport Link Speed. Setting to “Auto” the system will detect the HT link Speed automatically. HT Link Control These Items allow you to set the Hyper-Transport Link width. Setting to “Auto” the system will detect the HT link width automatically.
  • Page 32 ENDAT-K1001 USERS MANUAL UNICORN COMPUTER CORP. C1E Support When the C1E Support (Enhanced Halt Powerdown State) is enabled, the processor will transition to a lower core to bus ratio and lower voltage ID driven by the processor to the voltage regulator before entering Halt Powerdown State (C1).

  • Page 33: Boot

    ENDAT-K1001 USERS MANUAL UNICORN COMPUTER CORP. 3-3. Boot Use this menu to specify the priority of boot devices. Boot Settings Configuration: Quick Boot Enabling this setting will cause the BIOS power-on self test routine to skip some of its tests during bootup for faster system boot.

  • Page 34: Security

    ENDAT-K1001 USERS MANUAL UNICORN COMPUTER CORP. PS/2 Mouse Support Select support for PS/2 Mouse. Wait For “F1” If Error When this setting is set to [Enabled] and the boot sequence encounters an error, it asks you to press F1. If disabled, the system continues to boot without waiting for you to press any keys.

  • Page 35: Chip

    ENDAT-K1001 USERS MANUAL UNICORN COMPUTER CORP. User Password / Change User Password User Password controls access to the system at boot. These settings allow you to set or change the user password. Boot Sector Virus Protection This function protects the BIOS from accidental corruption by unauthorized users or computer viruses.
  • Page 36 ENDAT-K1001 USERS MANUAL UNICORN COMPUTER CORP. Internal Graphics Configuration: Internal Graphics Mode This setting specifies the internal graphics mode. UMA Frame Buffer Size Frame Buffer is the video memory that stores data for video display (frame). This field is used to determine the memory size for Frame Buffer. Larger frame buffer size increases video performance.
  • Page 37 1680x1050x24_2CH Reserved LCD Disable. Select appropriate LCD type according to the above Panel ID. If the LCD panel spec is not suitable for above list, please contact UNICORN for OEM BIOS/VBIOS request. SouthBridge Configuration HD Audio Azalia Device This setting enables/disables the high-definition audio device.

  • Page 38: Power

    ENDAT-K1001 USERS MANUAL UNICORN COMPUTER CORP. Realtek 8111C PCIE NIC This setting enables/disables the onboard LAN controller. Realtek 8111C Option ROM The items enable or disable the initialization of the onboard LAN Boot ROM during bootup. Selecting [Disabled] will speed up the boot process.

  • Page 39: Exit

    ENDAT-K1001 USERS MANUAL UNICORN COMPUTER CORP. 3-7. Exit This menu allows you to load the BIOS default values or factory default settings into the BIOS and exit the BIOS setup utility with or without changes. Save Changes and Exit Save changes to CMOS and exit the Setup Utility.

  • Page 40: Chpater 4. Vga, Lcd And Drivers

    UNICORN COMPUTER CORP. Chapter 4. VGA, LCD and drivers 4-1. Graphic controller Feature The ENDAT-K1001 integrated ATI Radeon™ HD 3200 graphics with ATI Avivo™ HD technology provides excellent graphics performance for most embedded applications. If additional graphics performance is necessary, ATI Hybrid CrossFireX™...

  • Page 41: Driver Utility Installation Guide

    When finishing the installation of Windows XP, please install the relative AMD display and AUDIO driver manually for compliance compatibility of hardware environment. Please contact sales department of UNICORN for Embedded OS user driver (Windows CE and Windows XP embedded). All of embedded OS driver is not be included in any versions of driver CD-ROM from UNICORN.

  • Page 42: Appendix A: Flash Memory Utility

    ENDAT-K1001 USERS MANUAL UNICORN COMPUTER CORP. Appendix A: FLASH Memory Utility Using this utility to update the system BIOS from a disk file to the on board Flash memory. Be aware the improper change of the system BIOS will cause the system to malfunction.

  • Page 43: Appendix B: Limited Warranty

    The limited warranty applies to normal proper usage of the hardware and does not cover products that have been modified or subjected to unusual electrical or physical stress. Unicorn Computer Corp is not liable to repair or replace defective goods caused by improper using or use of unauthorized parts. The following situations will be charged: 1.
  • Page 44 ENDAT-K1001 USERS MANUAL UNICORN COMPUTER CORP. RMA SERVICE REQUEST FORM When requesting RMA service, please fill out this “RMA Service Request Form”. This form needs to be shipped with your returns. Service cannot begin until we have this information. RMA NO.:...
  • Page 45 ENDAT-K1001 USERS MANUAL UNICORN COMPUTER CORP.  Issue Code of defect. 01 Second Times R.M.A. 11 Memory Socket Bad 02 No Screen (No Boot) 12 Hang Up Hardware 03 VGA (Display) Fail 13 Hang Up Software 04 CMOS Data Lost...

Table of Contents