Sharp EC-S2142 Operation Manual page 6

USING THE VACUUM CLEANER
Various ways to use the cleaning mechanism
When you press the Stop bottun, the auto cleaning procesure will start to compress the dust to the bottom of the dust cup.
When you do not want have automatic operation of the cleaning mechanism
Stop the automatic operation.Press the Stop button again.
Method 1
Set the product to "manual cleaning" in case the product is used just for a short time
Method 2
(1 minute or less).
• After vacuuming, be sure to operate the cleaning procedure manually before you put the vacuum cleaner
away. (See the following.)
How to set for method 2
1
Stop
Low
2
Every time you press it, the mode is
changed from one to the other.
3
Stop
When you want to operate the cleaning mechanism manually
It is most effective to do this job before emptying the dust cup or taking care of the product.
(Press for 3 seconds or more.)
Stop
After finishing vacuum cleaner
operation.
6
EC-S2142,S2141.indd 6
Pull the power plug and insert it into the outlet again. Do not press high/low
button.
(Press and hold for 3 seconds or more)
Press "Low" button.
Stop
In case the product is used just
for a short time, the automatic
operation does not start.
The setting is complete.
peep, peep, peep
In automatic operation
Every time you press
the"Stop"button,
the automatic operation
starts.
• The setting remains stored even if the power
plug is removed from the outlet.
Cleaning mechanism operation.
(For about 15 seconds)
(Continued)
Indication lamp/sound
peep
( Blue：Continuous lighting)
peep, peep
(Blue：Fast-speed blinking)
peeep
Finish
12.5.8 2:58:15 PM