Sharp EC-S2142 Operation Manual page 10

TAKING CARE OF THE PRODUCT
Clean of it over a newspaper etc.
Dust cup (Taking care of each component.)
Clean it with the supplied cleaning
brush.
Filter cover
Wipe with cloth soaked in water
or diluted neutral detergent.
Cover assembly
Dust cup
Water or diluted neutral detergent
Dry it sufficiently after washing.
Turn it upside down and press the lever
located on the bottom surface to open the
bottom lid.
If it is hard to open the bottom lid, clean the section marked with • thoroughly to remove foreign objects.
10
EC-S2142,S2141.indd 10
(Mounted on the product)
After use, store it in the
direction shown in the
drawing.
Washing with water
Dry completely in the shade.
Measure of drying
time: For a day.
Water or diluted neutral detergent
Cylindrical filter (Clean gently.)
Dry completely in the shade.
Measure of drying time:
For a day.
NOTE
• Do not use chemicals, warm water, etc.
• After cleaning, leave it in the breezy shade until it
becomes completely dry. Do not use a drier etc. at all.
(Using the dust cup before it becomes completely
dry may create a smell or cause malfunctions. )
High efficiency air filter
• Remove the dust by tapping
the filter on the floor with
newspapers etc. spread out,
and then wash with water.
• If it is not possible to remove
odor even after such efforts,
soak it in a solution of 10 mL
of bleach diluted with a liter
of water for about 3 hours,
and rinse.
Cup cover (Cylndrical filter)
Screw fin
(Continued)
Shake it sufficiently to
drain off the excess water.
Gear wheel
12.5.8 2:58:23 PM