Yamaha EF4500iSE Owner's Manual page 39

5. Remove the screws, and then pull outward on the
areas of front cover shown.
2
1 Screws
1
2 Front cover
788-7XFa
6. Drain the fuel remaining in the carburetor into an
approved container by loosening the drain screw
on the carburetor float chamber.
1
Drain s
1
7. Tighten the drain screw.
707-7XFf
8. Turn the engine switch to "OFF".
9. Turn the fuel cock knob to "OFF".
10. Install the cover and tighten the screws.
11. Tighten further if any screws, bolts and nuts are
loose.
12. Store the generator in a dry, well-ventilated place,
with the cover placed over it.
– 34 –
crew