Control Function; Engine Switch; Oil Warning Light (Red) - Yamaha EF4500iSE Owner's Manual

Hide thumbs Also See for EF4500iSE:
Table of Contents

Advertisement

CONTROL FUNCTION

1
3
2

Engine switch

The engine switch controls the ignition system.
1
7 "ON"
763-119
Ignition circuit is switched on.
The engine can be started.
2 5 "STOP"
Ignition circuit is switched off.
The engine will not run.
3 6 "START"
Starting circuit is switched on.
The starter motor starts and the engine can be started.
After starting the engine, take your hand off the switch
immediately.

Oil warning light (red)

When the oil level falls below the lower level, the oil
warning light comes on and then the engine stops
automatically. Unless you refill with oil, the engine will
not start again.
TIP
If the engine stalls or does not start, turn the engine
switch to "START". If the oil warning light comes on,
the engine oil is insufficient. Add oil and restart.
700-7XF
– 8 –

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents