PURE M3700 User Manual page 81

T.38 FAX Relay
Voice
Battery This mechanism will reverse
Reverse the polarity promptly that help
some PBX to identify the start
and end of each call
ON: Enable the function
OFF: Disable the function
Auto Answer This unit auto answer the call
from FXO
Disable: Disable Auto Answer
Enable: Enable Auto Answer
Enable w/ Pincode: Enable
Auto Answer and Pincode
verification.
Forward to SIP: When
incoming FXO calls is answer,
it is forwarded to a SIP
destination address. (For this
SIP address, please refer to
the configuration on Web
Folder: ADVANCED\SIP
COMMON\ Forward To field
and it depend on which SIP
Entity it joins)
Call Waiting Call waiting function for
answering two incoming SIP
VoIP phone calls
Enable: Enable call waiting
Disable: Disable call waiting
Control Yes: Use T.38 as FXS protocol
No: Don't use T.38 as FAX
protocol. If user send or receive
FAX by this port, gateway can
use G.711 (PCMU, PCMA) to
pass-through FAX, please refer
to 8.4 FAX
Input Gain Adjust Voice input Gain
Output Gain Adjust Voice output Gain
79
M3700
user manual
OFF
Disable
Disable
No
0
0
DCC NO. 91710015011