PURE M3700 User Manual page 23

3. When the CPU/ACT light is on, pick up the phone. You should hear the dialing tone.
4. ##0000 ; you should hear three short tones.
5. 15123
6. 010#
7. 02192*168*0*2#
8. 03255*255*255*0# ; Subnet Mask .
9. 981# ; Used to restart the unit.
10. Hang up the phone to complete the configuration.
Step 2：Configure IP address of PC
Use the provided Ethernet cable to connect your PC to the port labeled "PC", located on the rear
panel of the unit. For M3704, 3708, and 3716, it is located on the front panel.
Because the unit's default IP setting is 192.168.0.2, you must configure your PC to the same subnet.
"192.168.0.x" for example. The following example uses 192.168.0.5 for the IP address and
255.255.255.0 for the subnet mask.
; "123" is the web management password.
; "0" is to enable "manual" IP mode.
; IP address.
21
M3700
user manual
DCC NO. 91710015011