Sip Entity; Sip Outbound Authentication - PURE M3700 User Manual

7.3 SIP Entity

SIP service provider will assign one or more SIP accounts for you when you apply for the service. In
standard, the SIP account is called 'Public Address', so you need to configure the account
information in 'Public Address' item. The format is like an E-mail address such as mary@abc.com.
The Public Address will be generated automatically with the format below if user keeps the Public
Address empty.
"Default account's username" @ "Registrar" if you had enter the information below
1. Registrar Setting. For example: fwd.pulver.com, which configured at 7.2 SIP Proxy and
Registrar Parameters
2. Username of Default Account. For example: 413189, which is configured at below graph
For example: If the two data above is created, then the Public Address will be 413189@
fwd.pulver.com
Input Username and Password here if SIP Proxy needs it for authentication. This account
information also helps you to create Realm for SIP Outbound Authentication and Public Address.
Configuration
WEB Page: ADVANCED \ SIP COMMON
You can control the SIP entity on WEB page, just select 'Enable' or 'Disable'.

7.4 SIP Outbound Authentication

You need to configure outbound authentication for each SIP entity if SIP proxy server or other SIP
phone request for authentication. Please check with SIP service provider if you need the setting.
Please select the entity then input information includes realm, username, and password.
28