PURE M3700 User Manual page 24

After you have completed the PC's IP address setting, you will be required to restart the PC in order
for the new settings to take effect.
Step 3: Using the browser to configure the PPPoE Parameters of the gateway.
On the PC that is connected to the unit, enter the unit's IP address (Default 192.168.0.2) and press
enter. The unit will then prompt you with a dialogue box requesting that you enter a password. Use
"WEB" (all capitals), for the User field and "123" for the password field that you have previously
configured (Please keeps password blank if you don't configure password "123" before). Click the
OK button; you should now have access to the unit's web based management interface page.
The unit's
IP
address
"WEB" should
be all Capitals
22