Assembly Of Mechanism Deck - Sony XR-4880 Service Manual

Note: Follow the assembly procedure in the numerical order given.
HOUSING
2 Install the hanger onto
4 Fit claw on B part.
3 Put the housing
under A part.
Housing
A part
B part
ARM (SUCTION)
SECTION 3

ASSEMBLY OF MECHANISM DECK

5 Fit projection on C part.
two claws of the housing.
C part
Projection
7 Holder the hanger by bending the claw.
1 Install the catch to the hanger.
8 Hold the hanger by
bending the claw.
– 10 –
Hanger
6 Fit projaction on D part.
D part
2 Move the arm (suction) in the arrow
direction and fit on projection.
1 Fit the arm (suction) on the shaft.