Note: Follow the assembly procedure in the numerical order given.
HOUSING
4 Fit claw on B part.
3 Put the housing
under A part.
A part
ARM (SUCTION)
ASSEMBLY OF MECHANISM DECK
5 Fit projection on C part.
2 Install the hanger onto
two claws of the housing.
housing
C part
B part
projection
SECTION 3
7 Holder the hanger by bending the claw.
– 12 –
1 Install the catch to the hanger.
hanger
6 Fit projaction on D part.
8 Hold the hanger by
bending the claw.
D part
2 Move the arm (suction) in the arrow
direction and fit on projection.
1 Fit the arm (suction) on the shaft.