Memory Seat And Mirrors - Hummer H2 2010 Owner's Manual

Memory Seat and Mirrors

If the vehicle has this feature, the controls for the
memory function are located on the driver door.
1: Saves the seating position for driver 1.
2: Saves the seating position for driver 2.
: Programs and recalls the easy exit position.
These buttons are used to program and recall memory
settings for the driver seat and both the driver and
passenger outside mirrors. The settings for these
features can be saved for up to two drivers.
To store the memory settings:
1. While the vehicle is in P (Park), adjust the driver
seat, including the seatback recliner, lumbar, and
side wing area, and both outside mirrors to a
comfortable position.
2. Press and hold button 1 until a double chime
sounds to let you know that the position has been
stored.
A second seating and mirror position can be
programmed by repeating Steps 1 and 2 and pressing
button 2.
To recall the memory positions, the vehicle must be in
P (Park). Press and release either button 1 or button 2
corresponding to the desired driving position. A single
chime will sound and the memory position will be
recalled.
To stop recall movement of the memory seat feature at
any time, press one of the memory buttons or power
seat controls.
2-7