Heated Seats; Memory Seat And Mirrors - Hummer 2007 H2 Owner's Manual

Heated Seats

To heat the entire seat, press the horizontal button
with the heated seat and seatback symbol.
Press the button to cycle through the temperature
settings of high, medium and low and to turn
the heated seat off. Indicator lights will come on to
designate the level of heat selected: three for
high, two for medium, and one for low.
To heat only the seatback, press the vertical button
with the heated seatback symbol. An indicator light
on the seatback button will come on to designate
that only the seatback is being heated.
10
If your vehicle has this
feature, the buttons are
located on the front
doors. The engine must
be running for the
heated seats to work.
Additional presses of the seatback button will cycle
through the heat levels for the seatback only. Press
the horizontal button again to heat the whole seat.
The heated seats will be canceled after the ignition
is turned off. If you still want to use the heated seat
feature after you restart your vehicle, you will need
to press the heated seat button again.

Memory Seat and Mirrors

These buttons are used to program and recall
memory settings for the driver's seat and both the
driver's and passenger's outside mirrors. The
settings for these features can be saved for up to
two drivers.
If your vehicle has this
feature, the controls for
the memory function
are located on the
driver's door.