Running - Husqvarna EZ4216HO, EZ4217KAA, EZ4217KAA, EZ4822BI, EZ4822BI, EZ5221KAA, EZ5424BI Operator's Manual

Running

1. Release the parking brake by moving the
lever forward.
Your mower is equipped with an operator
presence system. When the engine is
running, any attempt by the operator to
leave the seat without first setting the
parking brake will shut off the engine.
2. Move the steering controls to the neutral
position (N).
3. Select the cutting height by adjusting the
cutting height pin. Release latch and
lower deck to set cutting height.
IMPORTANT INFORMATION
The mower deck's anti-scalp rollers should
be evenly adjusted.
WARNING!
Ensure that no one is near the
machine when engaging the
Blade switch.
4. Engage the mower deck by pulling out
the blade switch.
5. Move throttle control to full throttle.
6. The machine's speed and direction are
continuously variable using the two
steering controls. When both controls are
in the neutral position, the machine
stands still.
By moving both controls an equal
amount forward or backward, the
machine moves in a straight line forward
or backward respectively.
30
English-
OPERATION
Released parking brake
Cutting height selection
Engaging the mower deck
8011-711
8011-669