Parking Brake; Parking Brake; Motion Control Levers; Motion Control Levers - Husqvarna EZ4216HO, EZ4217KAA, EZ4217KAA, EZ4822BI, EZ4822BI, EZ5221KAA, EZ5424BI Operator's Manual

1. Parking Brake

IMPORTANT INFORMATION
The machine must be absolutely standing
still when applying the parking brake.
The parking brake is found on the left of the
machine. Pull the lever backward to activate
the brake and forward to release it.

2. Motion Control Levers

The machine's speed and direction are
continuously variable using the two steering
controls. The steering controls can be moved
forward or backward about a neutral position.
Furthermore, there is a neutral position,
which is locked if the steering controls are
moved outward.
When both controls are in the neutral position
(N), the machine stands still.
By moving both controls an equal amount
forward or backward, the machine moves in a
straight line forward or backward respectively.
In order, for example, to turn right while
moving forward, move the right control
towards the neutral position. The rotation of
the right wheel is reduced and the machine
turns to the right.
Zero turn can be achieved by moving one
control backward (behind the neutral position)
and carefully moving the other steering
control forward from its neutral position. The
rotation direction when zero turning is
determined by which steering control is
moved backward behind the neutral position.
If the left steering control is pulled backward,
the machine turns to the left. Use extra care
when using this maneuver.
If the steering controls are in uneven

CONTROLS

Parking brake not activated
Steering controls
WARNING!
The machine can turn very
rapidly if one steering control
is moved much further forward
than the other.
8011-711
8011-789
17
English-