Speed Control - Chrysler Town & Country 2011 Owner's Manual

Overhead (Halo) Light
• To activate the Halo lights, rotate the Halo switch control upward or downward to increase or
decrease the lighting.

SPEED CONTROL

Set
• With the Speed Control on, push and release the SET – button to set a desired speed.
Accel/Decel
• Once a speed is set, pushing the RES + button once or the SET – button once will increase or
decrease the set speed approximately 1 mph (2 km/h).
• Push and hold the RES + button to accelerate in 5mph (8 km/h) increments or push and hold
the SET – button to decelerate in 5mph (8 km/h) increments; release the button to save the
new set speed.
Resume
• To resume a previously selected set speed in memory, push the RES + button and release.
Cancel
• Push the CANCEL button, or apply the brakes to cancel the set speed and maintain the set
speed memory.
• Push the ON/OFF button to turn the system off and erase the set speed memory.
22
OPERATING YOUR VEHICLE
• The speed control switches are located on
Cruise ON/OFF
• Push the ON/OFF button to activate the
• CRUISE READY
• Push the ON/OFF button a second time to
the steering wheel.
Speed Control.
instrument cluster to indicate the Speed
Control is on.
turn the system off.
will appear on the